We should know that the batteries of automobiles do not last for a very long time. Even if you take care of them properly, still they will wear out one day. You start to notice the symptoms that the life of your semi-truck vehicle battery is going down. You will observe that the headlights start to dim, or maybe it jump-starts when the battery is completely dead. So, you must understand at this point how to install semi truck batteries?
How To Install Semi Truck Batteries?
When the battery is working for a semi-truck for 3 years now, you must know that it is time to replace it. Fortunately, the process of doing it is not very tough to follow. All you need to have are a few very basic tools. You can even find them in your garage, so just learn the skill and do it on your own.
But very few people know how to install semi-truck batteries. Here you will be able to learn the steps of installing it in the right way all by yourself. These steps include the following:
Installation Steps for Semi-Truck Batteries
For the installation of semi-truck batteries, you have to learn the skill of disconnecting and connecting the battery terminals and cables. If you learn this art, then all the steps given below will be more than easy for you to follow. Therefore, move forward and learn about them before digging into these practical steps.
Clean the Battery:
First of all, spot the places where you find the powdery corrosion material on the battery and its surroundings. You can simply use a cloth to remove all of this from the surface of the battery. This can be dangerous for your hands as the acidic nature of battery corrosive material can hurt them. Therefore, do it with hand gloves on.
Buy Correct Replacement:
You have to note down all the specifications, such as size, part number, model, etc of the old battery. Now go to the automobile shop where you can find the battery. Show them the year of your semi-truck, its model, the size of its engine, and other things that they ask you. Based on this appropriate information, they will suggest you the correct battery for your vehicle.
- Do not ever try to buy the battery without considering the older one, and the vehicle for which you need it.
- Always consult the professionals before you finalize the purchase.
Secure New Battery:
This is the next step that you have to learn about how to install semi-truck batteries. You have to add a new battery to the tray and secure it. For this purpose, you do not need to follow rocket science. You can reverse the process that you did for removing it. After this, add a coating of lithium grease to it. This will help in the prevention of corrosion.
- You have to be careful about the orientation of the battery. It should be the same as the older one. If you won’t acre about it, the battery will not eventually work for you.
- Check all the fasteners attached to the battery. This is to ensure that the battery is in its fixed place. It will not move and make noise when you will drive the vehicle.
- Try to keep the lithium spray solution to the negative and positive terminals of the battery. They should not reach or touch the other parts as it can prove to be very dangerous or harmful.
Reconnect All Cables:
You have to reconnect all the cables at this stage. This includes both positive and negative cables. Here, we will help you learn first about reconnecting positive and then about the negative.
The positive cable is connected to the engine bay. You have to remove the tie that is connecting it with the engine bay. While doing it, make sure that its end does not get in touch with any material that contains metal. Now you need a wrench that will help you tie it with the terminal. You may also add the cover on the cable at this stage.
For negative cable, you may repeat the process of positive cable. At the start, untie the negative cable from the negative terminal. You may just attach the clamp of the cable with the help of a wrench.
It can tighten it quite perfectly. Also, take care that it does not touch metal because an electric discharge can cause a problem for you. In the end, you may also add the plastic cover over it so that it may get protection.
Close Hoods, and Start Vehicle:
When you finally make sure that all the tools are taken out of the hood, you may close it. If you are sure that everything that is done to you is correct, then your semi-truck vehicle will start up right away. It will not pose an issue if the problem was due to the battery and not any other thing. You can also add an alarm code so that it is sure that everything is done right.
After doing this, in the end, you may check all the electronics. This includes the clock, navigation system, and the radio as well. You have to make sure that all of them are working properly. There is nothing left after this, so you are all set and ready to enjoy your next ride-on vehicle.
Well, we are sure that this information is of great help for you to learn about how to install semi truck batteries. You have to follow all the steps in sequence and take acre of sensitive things that can harm you. There is no big deal in doing this task because all you need is a guideline that is being provided.
Batteries are an essential part of our lives. If we look closely, we will find various appliances that are running with a battery. Batteries were invented to make our life easier and make things portable. Also, some batteries can take some places in your garage. Deep cycle batteries, golf cart batteries there are so many battery types that we hardly know about.
I am Jason D. Thompson, a passionate electronic worker. I’ve been working with batteries for a long time. I got to know that many of you struggle with buying batteries. For this reason, I’ve created a team that will test various batteries and makes a list that can help you with choosing the right one.